The quickest reliable finish for most stitched pieces is a simple no-border pillow: back your panel with fabric, sew three sides, turn, stuff, and close the gap by hand. If you’d rather have a removable cover, an envelope or zipper back works well instead. Before you cut anything, press your piece and test for colorfastness.
Table of Contents
- What to gather and how to prep your stitched piece
- Step-by-step: the basic no-border pillow method
- How to add a fabric border for a bordered pillow
- Which closure works best for your pillow
- Choosing and shaping your stuffing for crisp corners
- Adding piping, twisted thread, and other decorative trims
- Caring for your finished pillow
- More finishing resources from Simone Balman Art
- A note from the designer
- Ready to stitch your next pillow project?
- FAQ
- Sources
What to gather and how to prep your stitched piece
A smooth finish starts with the right supplies on hand and a little prep work on your stitched fabric.
- Backing fabric: cotton or linen that complements your piece’s weight and hand
- Stabilizer: Pellon or a light fusible interfacing to keep the panel from sagging once stuffed
- Needles and thread: a sharp hand needle and thread that matches your backing for invisible seams
- Fill: polyfill, a pillow form, or a combination for weight and shape
- Trims: piping, twisted thread, or chenille if you want a decorative edge
Test for colorfastness before you press or wash anything, and press face-down on a towel so you protect the texture of your stitches rather than flattening them. Skip direct steam on metallic threads. Leave about 1 to 1.5 inches of raw fabric margin around your design before trimming, and sew your seams with a 1/4 to 1/2 inch allowance, leaving a 3 to 4 inch gap for turning.
Step-by-step: the basic no-border pillow method
This is the fastest route from finished stitching to a usable pillow, and it works for most standard-sized designs.
- Cut your backing fabric to match the size of your trimmed stitched panel.
- Pin the two pieces right sides together.
- Sew around three sides and part of the fourth, leaving a 3 to 4 inch opening for turning.
- Trim the seam allowances and clip the corners diagonally to reduce bulk without cutting into your stitched threads.
- Turn the pillow right-side out and push out each corner gently with a point turner or the blunt end of a crochet hook.
- Stuff the corners first, then fill the rest gradually for an even shape.
- Close the opening with a ladder stitch so the seam disappears into the fabric.
Pro Tip: Keep your seam allowance consistent all the way around and resist the urge to overstuff. Even a little extra fill can pull corners out of square and distort the stitched design.
How to add a fabric border for a bordered pillow
If you want extra size or a framed look around your stitched piece, a bordered finish adds strips of fabric before you assemble the pillow.
- Decide on your finished border width, then add 1 inch to that number when cutting your strips to account for seams.
- Sew the top and bottom border strips on first, then add side strips, then press the seams away from the stitched panel so the design stays flat and undistorted.
- Add the side strips next, pressing the seams flat before assembling the pillow.
- Assemble the bordered top with your backing fabric and finish it exactly like the basic pillow method, sewing, turning, stuffing, and closing.
- Keep your stitched piece centered as you pin each strip, and avoid pulling the fabric tight to prevent distortion.
Which closure works best for your pillow
The closure you choose affects both the look of your finished pillow and how easily you can wash it later.
- Ladder stitch: an invisible hand stitch that hides the final seam almost completely, ideal for a permanently stuffed pillow.
- Whip stitch: faster than a ladder stitch and still tidy, a good option when the closure will be hidden by trim or backing.
- Envelope or overlap back: two overlapping backing panels create a removable cover, which makes washing simpler than a sewn-shut pillow.
- Zipper insertion: gives you a fully removable, washable cover, though it takes more sewing confidence than an envelope back.
- Buttoned back: decorative and functional, with buttons spaced evenly along the overlap for a tailored finish.
Pro Tip: If you’re making the pillow as a gift that might need washing, an envelope back or zipper gives the recipient an easy way to keep it fresh.
Choosing and shaping your stuffing for crisp corners
Getting the fill right makes the difference between a pillow that looks professionally finished and one that looks lumpy or flat.
- Follow the “less is more” rule: overstuffing pulls seams tight and can distort your stitched design.
- Fill the corners first using a chopstick, point turner, or crochet hook to push fill into tight spaces.
- Polyfill is a common soft filling for display pillows.
- A pillow form gives you consistent shape if you prefer not to stuff loose fill by hand.
- Some stitchers mix a heavier filler with polyfill to add weight and loft, a combination many stitchers use for pillows meant to sit rather than be tossed around.
Add heavier fillers first, topping with polyfill near the closing gap to hold fill in place.
Adding piping, twisted thread, and other decorative trims
Trims add a polished edge, but they change your sewing order and need a little extra seam room to lie flat.
- Sew piping or cording into seams during assembly, with extra seam allowance for neat edges.
- Attach chenille or ric-rac trim by sewing it into the seam during assembly.
- Twisted-thread edges can be hand-stitched or lightly glued for small accents.
- Trims help hide raw edges for a polished look without adding seam bulk.
Caring for your finished pillow
A little care before and after finishing keeps your stitching looking its best for years.
- Check thread and fabric for colorfastness before washing; if uncertain, press instead of washing.
- Press face-down on a towel to preserve the relief of your stitches rather than flattening them under direct heat.
- Protect finished pillows from direct sunlight and dust gently to maintain colors.
- If washing matters to you, a removable envelope or zipper back makes cleaning far easier than a permanently sewn pillow.
Pro Tip: When in doubt, press rather than wash. You can always launder a removable cover later, but you can’t undo water damage to a sewn-shut pillow.
More finishing resources from Simone Balman Art
A full cross stitch finishing techniques list is available for comparing pillow finishing against other options like hoops or framing. For help keeping trimmed edges neat before you sew, a guide on preventing fabric fraying is available. When you’re ready to plan your next project, fabric calculators and floss conversion tools can help you figure out yardage and thread needs before you start stitching.

A note from the designer
We design every pattern to hold up beautifully once it’s finished into a pillow, and for most stitchers, the no-border method is the fastest way to get there. Follow the steps above and your stitch texture stays crisp, not flattened.
— Simone
Ready to stitch your next pillow project?
Once you’ve got your finishing technique down, the fun part is choosing what to stitch next. Browse our digital patterns for pillow-ready designs you can download and start right away, or shop our printed pattern books if you prefer a physical copy on your lap while you stitch. Sign up for our newsletter for a free monthly pattern and finishing tips delivered straight to your inbox.

FAQ
What seam allowance should I use for a cross stitch pillow?
Most finishing tutorials recommend a 1/4 to 1/2 inch seam allowance when sewing your panels together. Leave a slightly wider raw margin, around 1 to 1.5 inches, before you trim so you have room to work.
Should I wash my cross stitch before finishing it into a pillow?
Test your thread and fabric for colorfastness first, since not every piece needs a wash before finishing. If you skip washing, press face-down on a towel to remove wrinkles while keeping your stitch texture intact.
How do I get sharp, crisp corners on a cross stitch pillow?
Clip your corners diagonally before turning the pillow right-side out, then push each corner out gently with a point turner or crochet hook. Stuff the corners first so they fill out fully before you work on the rest of the pillow.
What’s the best filler for a cross stitch pillow?
Polyfill alone gives you a soft, light pillow, while mixing in a heavier filler like crushed walnut shells adds weight and loft at the same time. Add the heavier filler first and cap it with polyfill near the opening so everything stays in place as you close the seam.
Should I choose a sewn closure or a removable cover?
A ladder stitch gives you an invisible, permanent closure that’s ideal if the pillow won’t need frequent washing. An envelope back or zipper makes the cover removable, which is worth the extra sewing if you want an easy way to clean it later.
Sources
- How To Make A Cross Stitch Pillow (Finishing Tutorial)
- How to finish your cross stitch into a pillow. – And Sew We Craft
- Cross Stitch Finish: Pillow Making Tutorial – Jo’s Country Junction
- How to Finish and Frame Cross Stitch (Wash, Mount, Hang) | Threaded



